MA-AL-T75E-01-03 Manual TUL375EN eng rev3
Rev.3 Page 4 of 4
MANUFACTURER DECLARATIONS
Statement of the Manufacturer:
The design has been developed according to the internal quality system respecting a series of rules aimed to reach an adequate design of all the
elements of the product.
All components of the product have been selected for the forecasted purposes and their characteristics are assured when the weather conditions
correspond to the conditions required by class 3K5 of EN 60721-3-3:1995
Tel. (+39) 041 5740374 – Fax (+39) 041 5740388 Web site www.venitem.com E-mail [email protected]
0051
Venitem s.r.l. Via del Lavoro, 10 - 30030 Salzano (VE)
16
DoP 0051 - CPR - 0267
EN54-4
Power supply equipment
for fire detection and fire alarms systems
TUL375EN
Wasting
This product must be wasted in appropriate
wheelie-bin for electric and electronic materials.
Do not put in wheelie-bin for other kind of
waste.
FUSES
F1 – Fuse of the 230 Vac supplying input
F8 – Fuse of protection over-tension
F3 – Battery fuse
F4 – Fuse Out 1
F5 – Fuse Out 2
F6 – Fuse Out 3
LED (when ON)
DL5,DL6,DL7 - Current consumed by charge
DL2 – Power supply anomaly
LED output (when ON)
DL9,DL10,DL11 – Intact fuse on corresponding output
Pict. 1
Pict. 3
Pict. 4
Pict. 2
