Venitem HOLA F24EN, Technical Manual

Page: 16 / 28

16
MANUALE TECNICO / TECHNICAL MANUAL
INSTALLATION
1. Fasten the sounder to the wall.
2. Insert the connection cables through the holes located on the base.
3. If required, modify the default settings by adjusting the dip switches
as indicated in the charts above.
4. Connect the power supply to the control panel.
5. Close the internal and external covers with the screws provided.
WARNING: The power supply must be of SELV type.
NOTE:
to avoid formation of condensation inside the sounder, any air
flow must be avoided. Once the cables have been connected, seal the
hole using some silicone. This operation will prevent the warm and
humid air of the building from forming condensation inside the sounder
during winter time, thus avoiding the risk of malfunctioning.
FIXING HOLES
MADE IN ITALY
1293
Venitem s.r.l. Via del Lavoro, 10 - 30030 Salzano (VE)
17
DoP 1293-CPR-0551
EN54-3
HOLA F24EN - FIRE ALARM SOUNDER
Intended for use in fire detection and fire alarm systems in and around buildings
TYPE B: for outdoor use
Other technical data: see the supplier’s technical dossier
ESSENTIAL CHARACTERISTICS PERFORMANCE
Performance under fire conditions Pass
Operational reliability Pass
Durability of operational reliability and response delay, temperature resistance Pass
Durability of operational reliability, humidity resistance Pass
Durability of operational reliability, shock and vibration resistance Pass
Durability of operational reliability, corrosion resistance Pass
Durability of operational reliability, electrical stability Pass
Durability of operational reliability, resistance to ingress Pass
DoP available on site
www.venitem.com
Settings and connections on page 23