MA-SE-DCT3-01-02 Manual Doge CT3 eng rev2
Rev.4 Pagina 2 di 17
Flashing of the front LEDs of the sounder
Pict. 1 ALARM ZONE 1, 2 e 3
Pict. 2 ALARM ZONE 24h and TAMPER
Pict.. 3 SYSTEM STATUS
(chart 1) Visualization of System Status
DIP5
Command
Flash status
OFF (default)
ARMED
All Leds flash 3 times and then switching off of the whole flashing
OFF (default)
PARTIAL
The central Led flash 3 times and then switching off of the whole flashing
OFF (default)
DISARMED
All Led switch on for 5 seconds and then switch off
ON
ARMED
All Led flash 3 times then flash of the central Led with 1 pulse and then pause
ON
PARTIAL
The central Led flash 3 times and then flash of the central Led with 2 pulses and
then pause
ON
DISARMED
All Led switch on for 5 seconds and then switch off
ON and OFF
ALARM
All Led flash with a pause. The number of flashes shows the zone in alarm
ON and OFF
TAMPER
All Led rotate
If the input/output time is activated, the Led, all of them or the central ones, flash until the end of the output time
If, during the input/output the zone 1 is open, the flash accelerates in order to show a pre-alarm condition
The flashing remains until the disarming of the system via the key
In case of anomaly all flashes accelerate.
TOTAL ARMING: 1 FLASH AND PAUSE
PARTIAL ARMING: 2 FLAHES AND PAUSE
Pict. 1
Pict. 2
Pict. 3
