manualshive.com logo in svg

Venini VVD60, User Manual, Page: 22 / 24

Share
Download
Venini VVD60 User Manual Download Page 22

Error codes 

 
For temperature faults, please ensure that the filter has been cleaned and 
that all ventilation is cleared.

 

 
IMPORTANT: If your appliance appears not to be operating 
correctly, then you should disconnect it from your mains 
supply and then contact Customer Services. 
 

DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. 

 

Please note that if an engineer is asked to attend whilst the product is 
under guarantee and finds that the problem is not the result of an 
appliance fault, then you may be liable for the cost of the call out charge. 
 

The appliance must be accessible for the engineer to perform any 
necessary repair. If your appliance is installed in such a way that 
an engineer is concerned that damage will be caused to the 
appliance or your kitchen, then he will not complete a repair. 
 
This includes situations where appliances have been tiled in, 
sealed  in  with  sealant,  have  wooden  obstructions  placed  in  front 
of the appliance, like plinths. Or any installation other than the 
one specified by Venini has been completed. 

 
Please refer to the conditions of guarantee that appear on the warranty 
card that you receive with the appliance.
 

 

 

22

Summary of Contents for VVD60

























Reviews:

No comments