23
position.
filter clockwise to
lock it back into position.
ain as this can cause a drainage failure.
2.
Pull out the main filter and rinse this under
the tap to remove any food debris that is
trapped in it.
3.
Place all filters back in their original
4.
You must turn the coarse
IMPORTANT: If a glass gets smashed inside of the appliance,
you must check there is no glass in the filter before the
machine is used ag
IMPORTANT: THE DISHWASHER SHOULD NEVER BE
SET ON A WASH CYCLE WITHOUT THE FILTERS BEING
INSIDE OF THE APPLIANCE.
Cleaning the spray arms
The spray arms should be cleaned regularly, to prevent hard water
deposits from clogging the spray arm jets and bearings.
o
To remove the top spray arm,
unscrew the nut and take out
the washer that sits on top of
the spray arm and pull to
remove.
o
Gently pull upwards to remove
the bottom spray arm.
o
Wash the spray arm in warm,
soapy water and use a soft
brush to clean the jets.
o
Rinse the spray arm thoroughly
and then reassemble the spray
arm back in its original
position.
Cleaning the control panel
IMPORTANT: Do not use any abrasive cleaner or household polish on
either the control panel or operating parts.
o
Wipe over the control panel using a brand new damp cloth with
warm water.
