13
o
After cleaning and washing them, wipe and dry them carefully.
o
Before placing the burners back on the hob top,
make sure that
the gas jet is not blocked.
o
IMPORTANT:
Make sure that you reassemble the burners in the
original way.
Maintaining the enamelled pan stands
o
IMPORTANT:
Make sure that the hob surface and pan stands
have cooled before you attempt to touch them.
o
Wipe the pan stands over with a soft, damp cloth that has been
put into warm soapy water. The cloth should be wrung out after
being taken out of the soapy water.
o
Using a paper towel, thoroughly dry the pan stands.
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o
Gas Safety and Measurement Regulations 2010
o
AS/NZS 3000 Wiring Rules
o
Electricity Safety Regulations 2010
o
The manufacturer’s Installation Instructions
