Venicci Avionaut ULTRALITE, User Manual & Warranty

Page: 30 / 33

• Make sure that the harness belts are properly
fastened so that the child is correctly positioned in
the seat.
• We do not recommend buying used child safety
seats – you can never be sure of their history.
However, if you decide to buy a used child safety
seat, choose one whose use history is known.
• Do not use the Ultralite child safety seat for more
than 10 years.
• Replace your child safety seat if it has been involved
in an accident.
• Do not make any modifications to the child safety
seat. They may cause partial or total loss of product
safety.
• The child safety seat must always be secured in the
car, even if no child is carried in it.
• The manufacturer takes into account the fact
that the child safety seat can leave dents in the
upholstery of the vehicle seat. This is unavoidable
due to the requirement of tight fitting of the safety
seat. The manufacturer is not responsible for any
damage caused by this.
• Make sure that the belts are properly fastened so
that the child is correctly positioned in the seat.
• Harness belts holding the child cannot be used
without covers.
• Make sure that you can place a maximum of one
finger between the harness and the child (1 cm). If
this distance is greater, tighten the harness.
• The Ultralite cushion consists of several elements.
Adjust them so that the height of the seat's harness
belts puts them parallel to the level of the child's
shoulders. REMEMBER: Each child has different
body proportions – check the belt position in
relation to the shoulders on a regular basis. This is
necessary to maintain the child's safety in the seat,
• If you want to protect your child from the sun, attach
and unfold the sun visor. The visor is a separate part
of the child safety seat.
• Use the Venicci Avionaut Ultralite child safety seat
when your child is between 40 cm and 86 cm tall
and weighs not more than 13 kg.
• When installing the Venicci Avionaut Ultralite seat,
use the seat facing forwards, which is equipped
with three-point safety belts, the belts should
be tightened and pulled through all points of the
seat marked in blue. Instructions for the correct
installation can be found in this manual and on the
27