VENGEANCE 2007 Hotrod Bones, Owner'S Manual

Page: 34 / 78

© 2007
American Hotrod Manufacturing, LLC • 2220 Eastridge Avenue Riverside, CA 92507
- 34 -
NOTE: The carburetor is a precise metering device and should only be serviced by a qualified technician. See your
Authorized Dealer or Service Center for assistance.
CONTROLS AND OPERATIONS
IGNITION - LIGHT KEY SWITCH
The ignition switch is located below seat, left-hand side of motorcycle and has two operative positions as wired from
the factory. The "off/lock" mode is approximately at the 12 o'clock position. The switch mechanism is activated by
inserting the key into the ignition key slot and turning the switch mechanism straight up and down and parallel with the
bike frame.
With the key in the center position the electrical system is off but the key cannot be removed.
To reach the "ON" position, rotate the ignition switch to approximately the 2 o'clock position. The headlight will come
on when the switch has been positioned in the "ON" position.
Error!
WARNING
DO NOT MODIFY THE IGNITION/LIGHT SWITCH WIRING TO CIRCUMVENT THE AUTOMATIC-ON
HEADLIGHT FEATURE. HIGH VISIBILITY IS AN IMPORTANT SAFETY CONSIDERATION FOR
MOTORCYCLE RIDERS.
CAUTION: ALWAYS REMOVE THE KEY WHEN THE MOTORCYCLE IS LEFT UNATTENDED. TO DETER THEFT
OF YOUR MOTORCYCLE AN ANTI-THEFT DEVICE, SUCH AS A CABLE, CHAIN OR ROTOR LOCK, IS
ADVISABLE.