Venga VG HD 3001, Manual

Page: 5 / 32

5 VG HD 3001
❑
Never move the appliance by pulling the power cord. Make
sure the power cord cannot get caught in any way. Do not wind
the power cord around the appliance and do not bend it.
❑
Never expose the appliance to possible water splashes and
never use the appliance in bath, shower or more generally with
wet hands or when you are in contact with water or near a sink
or other receptacle filled with water! However, should the
appliance happen to fall into the water:
❑
immediately unplug it.
❑
do not put your hands into the water.
❑
make sure your appliance is checked by a competent and
qualified electrician (*) before using it again.
❑
When using the hair dryer in the bathroom, always unplug it
when not in use as the proximity to water could constitute a
danger even when the hair dryer is switched off.
❑
Unplug the appliance when not in use or even if you put it down
only for a moment.
❑
The air inlet grid becomes hot when using the appliance. Make
sure the power cord does not come into contact with the air
inlet grid.
❑
The air inlet and outlet should never be blocked. Should the air
ventilation get blocked, the safety device will stop the appliance
immediately and the appliance will restart only when it has
cooled down.
❑
The safety grid of the air inlet prevents hair from being sucked
in. If the grid gets blocked by dust, you have to clean it or the
appliance might get damaged.
❑
Make sure the hair does not come into direct contact with the
air inlet.
(*) Competent and qualified electrician: after-sales department of
the producer or importer or any person who is qualified,
approved and competent to perform this kind of repairs in order
to avoid all danger. In case of need, you should return the
appliance to this electrician.