5
ASSEMBLY
ALWAYS
make sure the unit is
unplugged before
beginning
assembly
!
NEVER
move or clean the heater, or change the bulbs, while it is
plugged in
.
1) Carefully turn the
STOVE (A)
upside down and lay it on a clean soft surface.
2) Align the holes in
LEG (B)
with the holes in the corner of the stove frame.
3) Thread five
SCREWS (C)
through the holes in the leg, and into the stove frame.
Partially tighten
with a Phillips screwdriver.
4) Repeat Steps 2 and 3 for the other three legs.
5)
Tighten all 8 screws securely
with the screwdriver. DO NOT OVER-TIGHTEN.
ALWAYS
attach the feet before using!
NEVER
plug in or operate this unit if
the feet are not securely attached!
B
A
C