9
ALWAYS unplug
this fireplace heater
before assembly
or
cleaning, or before
relocating.
Failure to do so could result in
electric shock
,
fire
, or
personal injury
.
STEP 10.
Fit the slots in the back of firebox (A) over the hooks on the wall mount bracket, and
press the firebox against the wall mount bracket. The slots at the bottom edge of the firebox fit over
the wall mount bracket tabs. Thread the M4x10 screws (1) into the firebox and wall mount bracket
tabs. Tighten both machine screws and make sure the firebox is secure to the wall.
STEP 11.
Place the fuel bed (FB) onto the ledge at the front of the firebox.
The next step requires installation of a
GLASS panel!
The manufacturer recommends
that two adults install the glass panel. Always use
extreme caution
when handling
glass.
Failure to do so could result in
personal injury
or
property damage
.
STEP 12.
Set the glass panel hooks (B) into the slots at the top front edge of the firebox (A). Press
the two glass panel posts into the locking slots in the front of the firebox. Thread the M4x8 screws
(2) through the hooks and into the threaded holes in the firebox. Tighten with a Phillips screwdriver.
A
B
2
A B
Post
FB
Locking
Slot
Hook
A
1
Tabs
Hooks
Meijer.com
