vendon vBox2, Installation Manual

Page: 5 / 9

(non-condensing)
+5° to +50°C
5
Do not dissemble or modify vBox2 device. Dismantling of the vBox2 (dismantling of the plastic
casing or intervention in the PC board) can affect device’s functioning or damage device.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
Avoid liquid penetration into vBox2 device.
Install or relocate vBox2 device only when disconnected from the power supply.
Only cables provided by Vendon must be used.
Do not alter the cables provided with the vBox2.
A visual inspection of the vBox2 device must be performed on a regular basis.
Discontinue usage if the device looks deformed, broken or swollen.
Built-in rechargable Li-Po battery 3.7V 560mAh.
The battery withstands up to 300 full charge and discharge cycles under normal working
conditions (temperatures 25°C ± 0.5°C). The cycle life is the cycle times when the discharge
capacity is about 80% of the rated capacity.
The battery warranty is aligned with the vBox2 warranty and it is 1 year.
Only Vendon authorised and trained personnel may remove and change the battery.
The battery must be replaced only by a battery custom made for Vendon.
Never attempt to short-circuit the device or the battery.
The device and battery must be recycled and disposed of properly.
Disposal. Do not dispose vBox2 device with household waste.
Do not dispose of the battery or the device in fire.
If the device is not used for a long time, fully recharge the device every half a year. Store the
device in a cool and dry place.