SANDENVENDO AMERICA INC
1213686J ECN 57413
2
A COMMITMENT TO SAFETY
The SandenVendo is committed to safety in every aspect of our product design.
SandenVendo is committed to alerting every user to the possible dangers involved in improper
handling or maintenance of our equipment. The servicing of any electrical or mechanical
device involves potential hazards, both to those servicing the equipment and to users of the
equipment. These hazards can arise because of improper maintenance techniques. The
purpose of this manual is to alert everyone servicing SandenVendo equipment of potentially
hazardous areas, and to provide basic safety guidelines for proper maintenance.
This manual contains various warnings that should be carefully read to minimize the risk of
personal injury to service personnel. This manual also contains service information to insure
that proper methods are followed to avoid damaging the Hot Food Display (HFD) or making it
unsafe. It is also important to understand these warnings are not exhaustive. SandenVendo
could not possibly know, evaluate, or advise of all of the conceivable ways in which service
might be done, nor can SandenVendo predict all of the possible hazardous results. The
safety precautions outlined in this manual provide the basis for an effective safety program.
Use these precautions, along with the service manual, when installing or servicing the HFD.
We strongly recommend a similar commitment to safety by every servicing organization. Only
properly trained personnel should have access to the interior of the machine. This will
minimize the potential hazards that are inherent in electrical and mechanical devices.
SandenVendo has no control over the machine once it leaves the premises. It is the owner or
lessor’s responsibility to maintain the Hot Food Display in a safe condition. Follow all Safety
Rules and Safety Warnings in this manual. If you have any questions, please contact the
Technical Services Department of SandenVendo.
SAFETY RULES
•
Read the Safety Warnings before installation or service.
•
Test for proper grounding before installing to reduce the risk of electrical shock and fire.
•
Turn off power switch and disconnect power cord from wall outlet before servicing.
•
Use only fully-trained service technicians for Power-On servicing.
•
Use adequate equipment when moving the HFD.
•
Use only authorized replacement parts.
•
Be aware of inherent dangers in rocking or tipping the HFD.
•
Always turn power off before plugging or unplugging HFD to wall outlet.
FOOD FOR THE HOT FOOD DISPLAY
The HFD, HFDM, and HFDH units are design to hold unwrapped, wrapped, and boxed
food. The HFDHC is designed to hold wrapped and boxed food. Hot food displays
are not designed to heat cold food - put only hot food in the hot food display.
