All rights reserved.
Copyright 2015 Vendlet ApS
HOW TO REMOVE THE PLASTIC PLATES
HOW TO USE SIDE RAILS
Ver
s. 4.0
Scan the QR code
to watch instruction
videos
VEND
LET
V5 and V5+
T: +45 9631 0050 • M: [email protected] • W: vendlet.com
NOTE!
If VENDLET is to function as side rails, the plastic plates
must be used to ensure that VENDLET fulfils all require
-
ments to side rails.
Vendlet ApS shall not be liable if the plastic plates and
support bars are not used on beds with raised bars where
patients are left unattended.
1. Adjust the height of the bed to ensure correct work posture when the plastic
plates are removed from the bars.
2. Remove the plastic plates by grabbing them by the side and pulling upwards,
slightly slanted.
3. The plastic plates may break if they get caught. Consequently, plastiv plates
not in use should always hang on the support bar under the bars.
If the plastic plates are not used when the bars are raised, there is a risk that:
• The gap between the headboard/footboard and the VENDLET will
exceed 6 cm which could cause the patient to get pinned between
the parts.
• The distance between the bed frame and the lower edge of the bar
will exceed 12 cm. This could cause the patient to fall through this
opening, head or feet first, with a risk of getting pinned between the
parts.
