Computer settings
The MIC gain of the computer is generally set to the maximum. If the application
software shows that the input level is too high, the MIC gain can be appropriately
reduced.
The radio's transmitting can be adjusted using the tuning function in the application
software. Adjust the volume output of the computer from low to high. When the output
level exceeds the trigger level, the radio will be triggered to switch to the
transmitting.
Continue to increase the volume. The power of the output station will increase, and
the power of the radio will not increase with the volume.
The time is the best volume output position, and then increasing the volume will not
increase the power of the radio.
Observing the radio's transmit power can be judged according to the current of the
radio's power supply. The higher the current, the greater the power.
If the power supply does not have a current meter, you can also observe the
brightness of the radio's red indicator light TX to roughly determine the transmit
power.
Typical WSJT-X settings (Other Digital programs will be similar)