manualshive.com logo in svg

Vemer memo BUS, User Manual, Page: 6 / 68

Share
Download
Vemer memo BUS User Manual Download Page 6

En

gli

sh

- 4 -

User manual memo BUS

SAFETY WARNINGS

n

  During product installation and operation it is necessary 

to observe the following instructions:

1)  The instrument must be installed by a qualified person, 

strictly in observance of the connection diagrams shown 

in this manual.

2)  After installation inaccessibility to the terminals without 

using dedicated tools must be guaranteed.

3)  Before accessing the connection terminals, make sure 

that the leads are not live.

4)  Do not connect or feed the instrument if any part of it is 

damaged.

5)  The product must be installed and activated in com-

pliance with current electric systems standards.

6)  Do not use the instrument for anything other than the 

indicated purpose.

7) I n the electrical system upstream of the instrument 

must be installed a protection device against the 

overcurrents

8)  The product can be used in environments with 

Measurement Category III and Pollution degree 2, 

according to the Standard IEC 60730-1

DIMENSIONS

54

87

65

54

87

65

ENG

Summary of Contents for memo BUS





































































Reviews:

No comments