En
gli
sh
- 52 -
User manual memo BT GPS
GPS MENU
GPS menu allows you to enable or disable the presence of the additional GEO-2 module.
GEO-2 is a GPS module that allows you to capture the information of date, time and location from satellites and then to transfer them to
memo BT GPS.
With GEO-2 connected and enabled, memo BT GPS synchronizes date, time and location (latitude, longitude) every 30 seconds.
In this way the time of memo BT GPS is always synchronized and are canceled the drifts due to the tolerance of the oscillator which marks
the time base.
To enable the presence of GEO-2:
set
It’s also possible to display the status of the connection to GEO-2 (ok, waiting, error).
From the status page, while by pressing the key for at least 3 seconds it’s possible to force the reading from GEO-2
(the display shows
).
To disable the presence of GEO-2:
set
If GPS module is not connected, it’s advisable to set
to avoid displaying unnecessary information message
on the
start page of memo BT GPS (see page 8).
Note: the internal oscillator which marks the time base allows memo BUS to maintain the updated time even without the presence of GEO-2.
In this case clock accuracy is ± 0.5 seconds per day.
Summary of Contents for GEO-2
Page 2: ......
Page 57: ...English 55 User manual memo BT GPS C2 C1 C2 C1 Confirm delete ...
Page 59: ...English 57 User manual memo BT GPS 2 C2 C1 ...
Page 63: ......