Vemer ADR Series, User Manual

Page: 40 / 120

- 38 -
User Manual ADR-out Network Analyser
Engl
ish
• Select the relay operating mode (direct “dI” or reverse “rE” ) with the
“up” (
䊱
) or “down” (
䊲
) key and confirm with “T”
• Set the set-point value for the measurement selected (visible on the display
display). Use the “up” (
䊱
) or “down” (
䊲
) keys to set the flashing digit
and “pK” to go to the next digit.
Press “T” to confirm
• Set the differential value (hysteresis) with the same procedure as that for
the set-point
• Set the relay activation delay value (in seconds) with the same procedure
as that for the set-point
Note: if the energy operation is selected (active for relay 1 or reactive
for relay 2), the set-up movements from latching mode onwards will
not be displayed, as they serve no purpose
In this case, the relays will not operate as alarms, but as consumption
indicators for active/reactive energy
➧ ➧
pK
W
2
ACTIVE
POWER
T
W
2
ACTIVE
POWER
☛
☛
☛
W
1
2 3
ACTIVE
POWER
T
k W
ACTIVE
POWER
pK
☛
☛
➧
T
☛
☛
➧
English