4
Manual flash and automatic flash setting
1. The device defaults to manual flash. It needs to press the flash
button to flash (Mainly used for small area hair removal)
2. After the device turned on, keep the lamp head close to the skin,
press and hold the flash button for 3 seconds, the machine will
switch to automatic flash, you only need to move the device slowly,
it will automatically flash. (Be applicable for large area hair removal)
3. During the automatic flash mode, simply press the flash button,
the device switches to manual flash mode.
Preparation before use
Before use, shave the hair in the area that needs to be removed, keep
it clean and wipe the
area. This ensures that the hair follicle under the skin absorbs energy
to the maximum extent for optimum hair removal.
Start to use Veme machine
1.Plug the power cord into the device's power interface, connect the
device power supply to the power outlet.
2.Press and hold the switch button 3s to turn it on
3.Press the level adjustment button to adjust the level.
Starting from the low level, if you feel comfortable, please
adjust the level to the middle or high level to achieve
better results.
