Introduction of key function of products
4
Manual flash and automatic flash setting
1. The device defaults to manual flash. It needs to press the flash
button to flash (Mainly used for small area hair removal)
2. After the device turned on, keep the lamp head close to the skin,
press and hold the flash button for 3 seconds, the machine will
switch to automatic flash, you only need to move the device slowly,
it will automatically flash. (Be applicable for large area hair removal)
3. During the automatic flash mode, simply press the flash button,
the device switches to manual flash mode.
Inapplicable area/part
× Inside the mouth, labia, mucous membranes, etc.
× Nipple, Areola
× Plastic surgery, surgical site
× Adam’s apple, neck, ears, eyebrows, around eyes
× Acne area
× Tattoo, body painting
× Mole area
× large vein
(Note: This list is not exhaustive. If you are not sure whether
you can use this product, you are advised to consult a doctor)
Power
Adjustment
Button
Button/Level
Flash
Button
Power
interface
Summary of Contents for Kyanite V701-Pro
Page 2: ......
