Fixed washing plant
MODULA PLUS 2
Draft Vema Srl
16
1
GENERA
L
INFO
RMA
ZI
ON
5
INFORMATION CONCERNING CUSTOMER SERVICE
Machines are covered by warranty, according to the general terms of sale.
If during validity period malfunction or failure of parts of the machine which fall into the cases
specified by the warranty, occurs, the manufacturer, after the necessary checks on the machine, will
repair or replace the defective parts.
Any modification made by the user, without the express written permission of the manufacturer,
shall invalidate the warranty and release the manufacturer from any liability for damage caused by
the defective product. This is valid especially when these changes are performed on safety devices,
impairing their effectiveness. The same considerations are valid when spare parts non-original or
different from those explicitly specified by the manufacturer as "
safety devices” are used
. For all
these reasons, we recommend our customers to call always our Customer service department before
any modification to the machine.
Defects clearly visible when the product is delivered (defects on visible parts, breakage, dents,
operation defects, missing parts,…) must be immediately communicated to the manufacturer.
The manufacturer is not liable for defects not communicated at the
moment of delivery.
6
CUSTOMER RESPONSIBILITIES
Except for any other agreements, customer responsibilities are:
▪
Preparation of the installation site, including any building works and/or ducts required;
▪
Power supply, in accordance with the regulations in force in the country where the machine is
to be used;
▪
Pneumatic fluid power.
