J. Digital adjustments
55
DIMMING
Dimmer
intensity
variation
The dimmer is totally digital and guarantees the regulation of light
intensity with minimal changes in the selected color temperature.
Light intensity can be easily increased or reduced through the /
buttons located at the digital control panel. The display indicates the
selected dimmer value from 1 to 100.
Push the button to increase light intensity or push the button to
decrease it. If you keep pushed any of the buttons the you will get a fast
continuous variation.
MASTER & SLAVE
Master-slave
function
The integrated master-slave function allows to link an array of any VELVET
Light product together and operate them all without a controller.
The first VELVET fixture will be the Master acting as the controller and all
the others will react and copy the color temperature and dimmer values.
Use DMX XLR-5 in&out splitter cables (ref. THE-VL-DMXinout) to daisy
chain several VELVET Light panels.
Any VELVET Light, can be mixed in the same chain because they are
fully compatible.
To make the first unit as the Master follow this steps:
1.
Switch off the power button.
2.
Push “ ” and “ ” buttons at the same time and then switch on the
power button.
3.
Now the unit is in DMX mode and any DMX channel can be addressed.
4.
Push the “ “ button until “n n t” will be shown in the display.
IP54
Studio
