3
IV. ASSEMBLING THE CANOPY
Pull the canopy out of the storage bag and lay it on a table with the
Velcro side facing up. The front of the Canopy has a long Velcro strip
and diagonally cut corners. Open up the Velcro flap at the front of the
Canopy. The rear of the canopy has two short Velcro strips and
rounded corners.
Assemble the 85mm Side rails and insert them into the side pockets on
the Canopy. The angle joints on one end of the Side rails are at the
front end of the Canopy. The rear ends of the Side rails will project out
the back of the Canopy.
Put the looped end of each Front rigid strap around each angle joint.
The Velcro on the Front rigid straps should face down against the
Canopy.
Assemble the 58cm Front rail. Insert each end of it into the angle joints
and fold the Velcro flap at the front of the Canopy over it.
Disconnect the free half of the clip-on buckles from the Frame straps
and attach these to the Velcro ends of the Rigid front straps. Double
the ends of the straps back and Velcro them into place.
V. INSTALLING THE FRAME STRAPS
Wrap the Frame straps around the frame close to the front wheels.
These should be placed as forward and as far apart as possible. They
can go on the main cross-member, on the head tubes, or on the base of
the steering assemblies, depending on the design of the tricycle. To
protect the paint on the tricycle frame, wrap the transparent Frame
protective strips around the frame where the straps go.
VI. INSTALLING THE FRAME STRAPS
Here is the big moment! Flip over the Canopy so the Velcro side faces
down.
Fit the rear ends of the Side rails into the cups on the Storage bag and
hold the Canopy to the Storage bag with the Velcro.
Clip the bottom ends of the Rigid front straps to the Frame straps.