12
INSTALLATION
MANUAL
INSTALLATION
Connect the electric terminals of the power cable to the corresponding points on the
charger.
Make sure that all screws are securely tightened for effective contact of the
conductor’s active elements.
9
CONNECT THE CHARGER
Neutral
Phase 1
Phase 2
Phase 3
Ground
Neutral
Phase 1
Ground
LITE Zero/Uno
LITE Kubo
•
OPTIONAL: If you are also going to install a CURVE device, connect the wiring from
that device. For more information, see “INSTALLATION OF THE CURVE DEVICE”.
•
OPTIONAL: If you are going to connect the charger to a three-phase energy meter,
a communications device (modem, router, switch, ...) or to another charger, check
that the Ethernet wiring from that device is also available. For more information,
see “INSTALLATION OF THE THREE-PHASE METER SET” and/or “CONNECTION OF
THE CHARGER TO ANOTHER CHARGER, OR TO A COMMUNICATIONS ELEMENT”.