Ring base dimensions in mm
Productos
Relacionados
Dimensions in mm
TECHNICAL DRAWING
To install the hair dryer, place the ring base at the desire position. Using it like a template, mark the position of the holes and make them through
a 6 mm drill . Insert the dowels into the holes, place the base in right position and screw the supplied screws. Fit the vandal-proof plastic caps in
the ring base holes (figure 2). Plug the appliance to the electric network. From that moment, the hair dryer can stay in the ring provided for that
purpose and is ready for use.
Installation should be as shown in fig-0. The recommended heigh is 130-150 cm to floor, or 110 for adapted toilets.
INSTALLATION
These specifications can be modified and/or rectified due to manufacture requirements.
PAGE 2
Hair dryer to fix to wall
HAIR DRYER
02057
CODE
