10007947/A1
How to Connect to VELP Ermes Platform
AREX-6 Connect PRO
1/2
In order to speed up the connection, be sure to get in contact with your IT specialist to get all your laboratory Wi-Fi connection
details.
Requirements:
1.
Device
: PC, Tablet, Smartphone with Wi-Fi connection
2.
Browser
: Chrome, Safari, Firefox, Edge, UC browser
FIRST STEP |
ACTIVATE VELP ERMES ACCOUNT
o
Go to www.velp.com through your internet browser.
o
Create Your VELP Account or login if you already have it.
o
Access to your profile page and select
“
Configure Your VELP Ermes Account
”. Activate your VELP Ermes account after having
accepted Terms and Conditions.
o
You will receive an email containing your ID, Password and a link to proceed to VELP Ermes authentication at the email
address that you entered during the registration.
o
At the first login on VELP Ermes platform a new password will be requested:
remember to change it!
SECOND STEP |
CONNECT TO YOUR WIFI NETWORK
o
Turn on your AREX-6 Connect PRO, select the VELP_AREX6_(serial number) available on the Wi-Fi list, in order to connect
the instrument.
NOTE!
If the instrument does not appear in the list or it was already configured with another WiFi, follow the below
RESET
procedure
:
A. Push both knobs for 3 seconds
B. Push the central button until STAR AP appears
C. Push and Rotate the right knob to select YES
D. Push the right knob to confirm
E. Select VELP_AREX6_(serial number) available on the Wi-Fi list, in order to connect the instrument
o
Open a browser from your device (PC, tablet, smartphone), enter 192.168.0.50 address and set the parameters required to
connect the instrument to your Wi-Fi and select Push to confirm.
As Passkey, insert: velp
EXAMPLE:
Insert PassKey:
velp
WiFi Name:
(your WiFi name)
*
WiFi Password:
(your WiFi password)
*
Choose Auth:
Wpa & WPA2 Personal
Select
Push
to confirm and wait until the
“This site can’t be reached”
appears on your screen.
*
If necessary, please contact your IT administrator.
o
Wait until the Wi-Fi LED Icon stops blinking.
NOTE!
If the LED is still blinking after 2 minutes, please try the procedure again and check if connection parameters are correct
A
C
B
D
