Installing Your Front Wheel - Through Axle Version
1)
Insert the axle into the wheel hub as shown. Add the Slim Spacer on the
LEFT
side (Brake
Disk) and the Wide Spacer on the
RIGHT
side.
2)
Insert the front wheel with the spacers in between the front fork on the bike. Be sure to align
the disk between the brake caliper as shown in Figure 2.
3)
Now on the outside add the washer and nut on each side and hand turn until snug
.
4)
Using your wrench, tighten each side alternatively until snug (you might need to secure the
opposite nut slightly so the whole axle doesn’t turn
)
.
5)
Now tighten each nut putting your weight into the wrench. Your front wheel is now installed.
6)
The Adjustment Nut needs to be very tight, be sure to retighten after your first couple
rides.
Brake Caliper and
Brake disk
on left side of bike
Figure 1
Figure 2