c o m p u t e r, m o b i l e e t c g e n e r a t e t h e
electromagnetic signal, because the
electromagnetic signal will cause the
inaccurate heart rate measured.
¢
HOW TO READ EACH DISPLAY
1.As shown in FIG. R:
i . U p p e r l i n e s h o w s
t h a t y o u r c u r r e n t
r i d i n g s p e e d i s
20.2km/h.
ii.KM means you are
in metric system and
all the speed and
d i s t a n c e w i l l b e
represented in metric.
iii.Lower line shows the clock.
iv.Icon "
▲
" or "
▼
" flashing shows that your
current speed is higher or lower than the
average speed.
v." " flashing means to receive the signal.
2.Press MODE and switch to the display as FIG.S:
i.Upper line shows that your current riding
speed is 20.2km/h.
ii.Lower line shows that your riding distance is
3.Press MODE again
a n d s w i t c h t o t h e
display as FIG.T:
i . U p p e r l i n e s h o w s
your current riding
speed.
ii.Lower line shows
your riding time.
iii.It will stop counting
automatically if there
is no signal received
over 6 seconds.
4 . P r e s s M O D E a n d
switch to the display as
FIG.U. The upper line
s h o w s y o u r c u r r e n t
speed, and the lower line shows your current
pulse rate. (JS-204A/JS-212A)
5.Press MODE again
a n d s w i t c h t o t h e
display as FIG.V:
I. U p p e r l i n e s h o w s
y o u r c u r r e n t r i d i n g
speed.
ii.Lower line shows that
the temperature where
19
FIG.R
KM/H
SPD
18
FIG.S
FIG.T
FIG.U
KM/H
SPD
DST
KM/H
SPD
RTM
Copyright © 2010 www.Veloset.co.uk UKET limited
