background image

• Built-in 2000 watts Dynamic/1000 watts RMS high efficiency

Class D amplifier

• Adjustable (40 to 120 Hz) low-pass crossover (defeatable)
• Line-level (RCA) inputs and outputs 
• Speaker-level inputs with five way binding post connections 
• Signal sensing auto turn on/off (defeatable) 
• Variable volume control 
• Selectable phase control (0, 90, 180 or 270 degrees)
• Frequency response of 28-120 Hz (SPL-800R),

24-120Hz (SPL-1000R), 22-120Hz (SPL-1200R),
20-120Hz (SPL-1500R),  

• Magnetically shielded for video use (SPL-1000R, SPL-1200R

and SPL-1500R) 

• Multiple staggered low-pass crossovers; 12 dB/octave initial,

48 dB/octave ultimate 

• Driver Displacement Control circuit to prevent over excursion

and amp clipping 

• Blue power indicator LED 
• High-excursion EPDM rubber surround 
• Oversized spider for linearity at high excursion 

INSTALLATION

Your new Velodyne subwoofer provides for a number of

installation options. Read all the installation information below in

order to determine which installation option is best for your

system. Remember to perform all installation procedures with

system power turned off.

3

Summary of Contents for SPL-1000R



















Reviews: