9
.
w w w . v e l o d y n e . c o m
MicroVee User’s Manual
Figure 4 shows an easy way to connect your Velodyne subwoofer directly to your receiver or
integrated amplifier if it lacks line-level outputs. You may also connect your satellites directly to
your receiver or amplifier along with the subwoofer. Your receiver or amplifier will not notice the
additional load of the subwoofer due to the high input impedance.
When the subwoofer is installed in this fashion, your satellite speakers will be crossed over at
120 Hz which removes the lower bass frequencies from your speakers, enabling them to do a
better job reproducing the higher frequencies.
Figure 4. Installation Using Speaker-Level Inputs
Speak er -Le v el Connection - OPTION C
