Copyright Velocomp LLC 2005-2015
7
USING POWERPOD ON YOUR DAILY RIDES
1)
Attach PowerPod sensor to your bike
2)
Click PowerPod button to wake up the PowerPod
3)
FLASHING RED
means the PowerPod battery is low and should be
recharged soon.
4)
FLASHING GREEN
means the speed sensor is not yet awake.
5)
After PowerPod finds your sensor the status light will change to
SOLID
GREEN
. SOLID GREEN means the PowerPod is ready to measure
power.
GREEN MEANS GO!
Now, just ride—PowerPod will send its power readings to your bike computer
USING POWERPOD WITH MULTIPLE BIKES
You can use PowerPod easily with each of your bikes.
Each bike needs to have its own ANT+ speed sensor, PowerPod mount, and
bike computer mount.
1)
Purchase a PowerPod mount for each bike, and install the PowerPod
mount according to instructions
2)
Attach the PowerPod sensor to the bike you are using for today’s ride
3)
Move your bike at least 100 feet away from any other bike with an
ANT+ sensor
4)
Perform the PowerPod pairing process (page 6) on your bike
5)
Also, pair your bike computer to the ANT+ sensors on your bike
6)
Each time you pair your PowerPod to a different speed sensor (each
bike has a unique speed sensor) PowerPod automatically goes into
self-calibration mode (
SOLID YELLOW
!
FLASH YELLOW
, page 6)
7)
After 5 minutes of riding in self calibration mode PowerPod
power measurements will be displayed on your bike computer.
8)
On all subsequent rides with the same bike,
and
as long as you don’t
pair PowerPod to a different speed sensor,
you will see accurate
power right from the start of your ride.
9)
Whenever you switch bikes, repeat the above steps. PowerPod will
automatically self-calibrate for 5 minutes.