Copyright Velocomp LLC 2015-2018 www.velocomp.com
To use PowerPod with your indoor trainer or rollers:
1.
Connect PowerPod to your computer, click button to turn it on, then launch Isaac
software
2.
Select the Isaac command “Device/Edit Trainer Settings…”
3.
Select your indoor trainer OR rollers model from the list underneath the tab. In the
example below, “Kinetic Cyclone” indoor trainer has been selected. Then, in the bottom
of the window
click the “Send to iBike” button below the speed/power graph.
PowerPod will “memorize” the selected indoor trainer model in its memory.
4.
To turn on indoor trainer mode
, use this command from Isaac,
then wait for Isaac’s
confirmation that trainer mode has been turned on:
5.
IMPORTANT: ONCE ENABLED, INDOOR TRAINER MODE WILL REMAIN “ON” FOR ALL
SUBSEQUENT POWEROD RIDES, UNTIL YOU TURN IT OFF.
IMPORTANT: WHEN TRAINER MODE IS “ON”, POWERPOD WILL NOT PROVIDE
ACCURATE POWER READINGS WHEN USED FOR OUTDOOR RIDES.
6.
To turn indoor trainer mode off
, select this command from Isaac,
then wait for Isaac’s
confirmation that trainer mode has been turned off:
7.
IMPORTANT: WHEN INDOOR TRAINER MODE IS “OFF”, POWERPOD WILL NOT
PROVIDE ACCURATE POWER READINGS WHEN USED FOR INDOOR RIDES.
