STEP 5
Align the CAM HOUSING on your end panels with your PINS (B) on your back panel.
Tighten by rotating the screw to the right hand side.
Place division in centre and align the top with the PINS (B) on both the ends & division,
tighten with your screw driver.
4 / 5
STEP 6
Stand hutch upright
holding division, using
CONFIRMAT SCREW (E),
line up with holes on back
and tighten using your
screwdriver. Place the
SCREW CAPS (G) into the
screw.
(E)
(G)
CAM HOUSING
BACK PANEL
BACK PANEL
DIV
ISIO
N
LH
EN
D
RH EN
D
TOP
BACK PANEL
BACK PANEL
