33
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Selecting the low-pass filter
If one subwoofer is connected to the
VDP 01-MP3 (“MONO” setting), you can
set the low-pass filter to 80, 120 or 160
Hz. You can also deactivate the low-
pass filter.
To set the subwoofer’s low-pass filter,
➮
press the SEL button
C
six times.
“SUB ST-MO” appears in the display.
➮
Select “MONO” using the or
button
3
.
➮
Select the required low-pass filter
by pressing the or button
3
.
If you want to deactivate the low-pass
filter,
➮
select the “LPF OFF” setting by
pressing the or button
3
.
When you have finished making your
changes,
➮
wait 5 seconds for the settings to
be saved.
Switching loudness on/off
If loudness is activated, the bass and
treble levels are aurally compensated,
i.e. they are boosted at low volume lev-
els.
➮
Briefly press the M3/LOUD button
:
.
“LOUD ON” appears briefly in the dis-
play. “LOUD” appears in the display
when loudness is activated.
To deactivate loudness,
➮
briefly press the M3/LOUD button
:
.
“LOUD OFF” appears briefly in the dis-
play. “LOUD” disappears from the dis-
play.
Adjusting the loudness intensity
If loudness is activated (“LOUD ON”),
you can set the loudness boost for the
following frequencies: 20, 40, 60 or
80 Hz. You can adjust the boost level
between 0 and 15 dB in steps of 1 dB.
➮
Press the M3/LOUD button
:
for
longer than three seconds.
“LOUD CTRL” appears in the display.
➮
Select the frequency by pressing
the or button
3
.
➮
Keep pressing the or button
3
until the required boost level
appears in the display.
When you have finished making your
changes,
➮
wait 5 seconds for the settings to
be saved.
LOUDNESS
SUBWOOFER
