Latest instructions and videos:
https://velocirax.com/assembly
A
SSEMBLY
I
NSTRUCTIONS
●
Wrench or socket
13, 18 & 19 mm
T
OOLS
R
EQUIRED
F
OR
A
SSEMBLY
Alternate
●
1 X
1.
Test Light Assembly
2.
Peel and Stick Foam Tape to Both Light Assemblies
●
Drill with #2 Phillips Tip Screwdriver
Plug into hitch electrical outlet receiver
on the vehicle and confirm functionality
(Left/Right Signal, Brake, Tail lights)
3.
Peel and Stick Both Lights Assemblies to the Bottom of the Lower Bar
●
Safety Glasses
Drivers side – short wire
Passenger side – long wire
Note: Tape will cover the full surface including the screw holes on the light assembly
Side View
Tape
Tape
Light Assembly
Lower Bar
Place both lights ¼ - ⅜ inch
from both sides of the black
support structure on the post.
Bottom View
●
5 mm Allen
