4
DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX
chain.
Operating Modes:
You can use the TH-250(WW) in 3 ways:
⚫
Auto Mode - The unit will automatically chase through the different colors and built-in programs.
⚫
Slave Mode
– The unit will run under slave mode.
⚫
DMX control mode - This function will allow you to control each individual fixtures traits with a standard
DMX 512 controller.
DMX Mode:
Operating through a DMX controller give the user the freedom to create their own programs
tailored to their own individual needs. This function also allows you to use your fixtures as spot lights.
1.
This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller.
2. The TH-250(WW) uses 3 dmx channels
to operate. Please see “DMX Values and Functions” for the DMX
traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX controller.
Set your desired DMX address following the setup specifications that come with your DMX controller
Back View: