Five-Year Limited Warranty
This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for
a period of five (5) years from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s
responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that
fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be
determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance.
EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and
return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s
own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group. © 2018 Gradus Group LLC. All Rights Reserved.
MOUNTING THE CAMERA
There are five mounting holes on the
bracket’s camera platform. Place your
camera on the platform and align your
camera’s mounting socket with the
mounting hole that best centers your
camera on the bracket. Attach the
camera to the QuickDraw bracket using
the 1/4˝-20 mounting knob. Tighten the
knob until firmly connected.
MOUNTING THE FLASH
The QuickDraw Bracket is equipped
with an accessory-shoe mount which can
be used to mount your flash unit or TTL
cord. To mount your flash, loosen the
red knob on the cold shoe, insert your
flash, and tighten the knob. Unless you
are using a wireless flash system, you will
need to connect your flash to the
camera with the appropriate cord. You
may use cable ties or an optional cord
wrap to secure the cord alongside the
bracket.
To attach separate flash heads such as
Norman or Lumedyne, or to use
off-camera shoe cords such as the Nikon
SC-28 or SC-29, remove the cold-shoe
mount from the flash arm and use the
included mounting screw to mount the
flash head to the bracket.
USING THE BRACKET FOR
HORIZONTAL SHOOTING
Position the flash arm so that it is raised
directly above the top of the camera’s
body with the flash mount centered
above the lens when the camera is held
horizontally.
USING THE BRACKET FOR
VERTICAL SHOOTING
Rotate the flash arm 180° to center the
flash above your lens when the camera is
held vertically.
GG3
