20
• When a group is set to TTL
mode, the flash exposure
compensation (EV) can be
adjusted from −3 to +3 in
1/3-stop increments.
• When a group is set to
Manual mode, the flash
output power can be adjusted
from 1/1 (full power) to 1/128
in 1/3-stop increments.
• When a group is set to
Delayed Time (DT mode), the
delay time can be adjusted
from 0 to 5 seconds in
1/10-second increments.
Important! When shooting in
HSS, DT mode delays the time
an external flash fires after it’s
triggered.
• The flash coverage value
can be individually set in
all operating modes. See
Controlling Flash Coverage
(Zoom)
below.
TTL Mode
Manual Mode
DT Mode