LEDC16
V. 02 – 21/10/2015
3
©Velleman nv
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be returned
to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Vellight
®
! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
2.
Safety Instructions
Do not use the device when noticing damage to housing or cables. Do not attempt to service
the device yourself but contact an authorised dealer.
DO NOT
disassemble or open the cover. There are no user-serviceable parts inside the device.
Refer to an authorized dealer for service and/or spare parts.
3.
General Guidelines
Refer to the
Velleman
®
Service and Quality Warranty
on the last pages of this manual.
Although equipped with several protections, only use the controller for its intended purpose.
Using the controller in an unauthorized way will void the warranty. The warranty will not cover
damage caused by disregard of certain guidelines in this manual and the dealer will not accept
responsibility for any ensuing defects or problems.
4.
Features
ideal for use with Vellight
®
LED strips (e.g. LEDS01B)
Bluetooth connection with smartphone or tablet
o
Android device: ColorEasy app
o
iOS device (iPhone, iPod touch and iPad): ColorEasy app
4 functions:
o
switching: on-off
o
dimming: up-down
o
built-in stand-alone programs: fading and flashing RGB animations (43 modes)
o
RGB colour selection: 16 million colours
built-in protections:
o
incorrect cable polarity
o
overload
o
short circuit
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
power supply
3
status indicator
2
LED output
6.
Installation
1.
Power Supply
Connect the red power cable to power positive and the black power cable to power negative. Make
