VTLAMP3WN
V. 04 – 29/05/2018
3
©Velleman nv
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If
in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2.
Safety Instructions
Keep the device away from children and unauthorised users.
Never
leave the magnifying lens unattended where direct sunlight may pass through it: this
creates a fire hazard.
Do not use the luminaire with a cracked or broken protective shield. Disconnect immediately from
the mains.
Warning:
if the power cable is damaged, it must be replaced by the manufacturer, his service
agent, or a similar qualified person in order to avoid any hazard.
3.
General Guidelines
Refer to the
Velleman® Service and Quality Warranty
on the last pages of this manual.
Indoor use only.
Keep this device away form rain, moisture, splashing and dripping
liquids.
Keep this device away from dust and extreme heat.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
4.
Features
electronic ballast
clamp
optional
o
stand with wheels: VTLAMPST
o
table stand: VTLAMPST1.
5.
Installation/operation
Refer to the illustration on page
2
of this manual.
1.
Open the table clamp
[1]
by twisting the T-handle counter clockwise.
2.
Slide the clamp
[1]
over a suitable and solid horizontal surface capable of carrying it, T-handle at the
bottom. Do not attach to round objects e.g. tubes.
