![background image](http://html1.mh-extra.com/html/velleman/vrc801d/vrc801d_manual_4092001003.webp)
VRC801D
VELLEMAN
- 3 -
4. Learning Function
The learning function is used to supplement the pre-programmed code list. The standard code list may provide most of the
functions needed, but you can add a small number of functions for your remote control or add a new code from a remote
control not mentioned in the code list. Prepare the other remote control from which you will copy the code.
a.
Learning a Command
•
Press the device key you would like to learn a
command to.
•
Hold the SET key pressed for 3 seconds.
•
Select LEARNING using the or the button and
press OK.
•
Select LEARN KEY using the or the button
and press OK. The LCD will display SELECT KEY.
•
Select the target key you want to learn the
command (in this example: power) to. The LCD will
display WAITING.
•
Point the IR sensor of the
VRC801D
towards the IR
sensor of the other remote control (max. distance of
5cm).
•
Hold the original key (in this example: power) on the
other remote control pressed until the LCD of the
VRC801D
reads SUCCESS. Repeat the 3 steps
above if the LCD displays FAILED or to learn
another command.
Remark: - When transferring multiple commands to the same target button, the
VRC801D
will only save the last programmed
command.
-
All functions are transferable except for SHOW VIEW, MACRO, SET, LEARN and ALL OFF.
-
This remote control accepts up to 100 codes for a total of 8 devices. However, it may not accept some codes.
b.
Deleting a Learned Command of a Device
•
Press the device key you would like to delete a
command from.
•
Hold the SET key pressed for 3 seconds.
•
Select LEARNING using the or the button and
press OK.
•
Select DELETE KEY using the or the button and
press OK. The LCD will display SELECT KEY.
•
Press the key you would like to delete. SURE DELET
will appear on the LCD. Press OK to confirm.
SUCCESS will be displayed.
•
Repeat the step above for each key you would like to
delete. Press a device key to exit the delete mode.
c.
Deleting All Learned Commands of a Device
Use this function to delete all the commands of a device
instead of deleting all the commands one by one.
•
Press the device key you would like to delete the
commands from.
•
Hold the SET key pressed for 3 seconds.
•
Select LEARNING using the or the button and
press OK.
•
Select DELETE DEV using the or the button and
press OK. The LCD will display SELECT DEV.
•
Select the device you would like to delete using the
corresponding device key. Press OK.
•
SURE DELET appears on the LCD. Press OK to
confirm.
•
Repeat the two steps above if you would like to delete the commands from another device.
•
Press EXIT to quit.
Remark: - It will take about 3 minutes to delete all the commands in one device. If the commands are not numerous, we
suggest deleting the commands one by one.
Summary of Contents for VRC801D
