Velleman VMB1TC, User Manual

Page: 10 / 24

10
7. Sensors setup
ENGLISH
Before the controller can work with the temperature sensors it must first scan the network for all connected sensors.
If temperature sensors are installed or removed afterwards, the search process must be repeated to update the list of
sensors to the new situation
. NOTE: Make sure "all rooms" or "zone" is not selected.
1. Press and HOLD the ‘Menu’ button to open the extended menu.
Scroll through the extended menu using ↑ or ↓ buttons until the
‘Configuration’ menu appears. Select the configuration menu
using the
→ button.
2. Scroll through the Configuration menu using
↑
or
↓
buttons until
the ‘Scan sensors’ item appears.
3. Confirm the scan sensors menu using the
→
button.
The search for sensors on the network is now in progress.
4. Once the search process is completed, the first of the connected
temperature sensors is shown on the display.
Searching for temperature sensors
1
2
3
4
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑