RCQC3
V. 01 – 11/07/2016
4
©Velleman nv
Only use this product in an area legal for remote control flying and free of interfering radio signals.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
Keep this manual for future reference.
4.
Features
6-axis gyro quadcopter for indoor and outdoor use (please ensure enough flying space)
with FPV (first person view): wifi live camera 720p (1280*720) with built-in SD-card reader
smartphone required to control the device with the free app
supported mobile operating system: Android
®
- iOS
®
supports various movements: up-down, forward/backward, turn left-right, left/right side to side fly,
hover, 3D flips & rolls, headless easy, 360° tumbling
fly mode, one key return, take photo/video record, wifi live video transmission
stable, easy to control
2.4 GHz technology reduces interference when flying multiple quadcopters at once
rechargeable high performance lithium-polymer battery (charges via included USB cable)
recommended age: 14+
Important
: Always comply with local rules and regulations when using this device.
included:
o
quadcopter
o
4-channel digital proportional transmitter
o
3.7 V, 500 mAh lithium-polymer battery (for quadcopter)
o
USB charging cable
o
wifi camera
o
mobile device holder
o
4 spare blades
o
multilingual user guide with mounting and flying instructions
5.
Remote Control Overview
Refer to the illustrations on page 2 of this manual.
1
antenna
7
N/A
2
indicator
8
fine-tune switch forward-backward
3
high/low speed switch
9
headless mode switch
4
3D flight switch
10
fine-tune switch accelerator-rotation
5
left throttle stick (accelerator-rotation)
11
on-off switch
6
right cyclic stick
(left-right-forward-backward)
12
display
6.
Remote Control
6.1
Installing the Batteries
1.
Use a screwdriver to remove the screw on
the back of the remote control. Open the
battery cover.
2.
Install four AA-type batteries (not included)
according to the indicated polarity.
3.
Close the battery cover and tighten the
screw.
