PI300S GB
4
10. SAFETY PRECAUTIONS
In case of trouble with the AC output, e.g. short-circuit, overload, etc… the
protection circuit will automatically cut off the output.
In such cases :
(A) switch off the power at once
(B) disconnect all devices
(C) check the devices for damage
(D) connect the devices again as soon as all problems, if
any, have been solved
When the device has been used for a prolonged period of time, the AC output
may suddenly be cut off although the battery voltage is still very strong. This may
be caused by high temperatures. If this happens, please proceed as follows :
(A) switch off the inverter at once
(B) disconnect some of the appliances or wait until the inverter cools off
(C) switch the inverter back on
Always keep the inverter in an environment which is :
(A) well-ventilated
(B) not exposed to direct sunlight or any other heat source
(C) inaccessible to children
(D) safe from water/moisture, oil or grease
(E) safe from any flammable substance
Connecting the inverter in the wrong way will void the warranty.
Do not operate this device with wet hands and do not open the housing in order to
avoid the risk of electroshocks.
Do not establish a direct connection between this device and another AC power
source. The ensuing damage would void the warranty.
Do not use this device with appliances of more than 300W.
This device cannot be used with inductive or capacitive loads, e.g. a laptop.
Disturbances may occur when using the PI300S with certain television sets.
Consult the manual of your TV if this problem should occur.
WARNING : DO NOT CONNECT ANY INDUCTIVE LOADS WITH THIS DEVICE !
