![background image](http://html1.mh-extra.com/html/velleman/personal-scope-hps5/personal-scope-hps5_manual_4104867010.webp)
10
PersonalScope
TM
Important:
Do NOT perform measurements unless the
battery compartment is closed. The battery
cover should only be removed for the calibration of the
probe 's X10-position.
F
When first using the rechargeable batteries or if the
batteries are completely discharged, the user should
charge them for at least 12 hours before using the
unit.
F
When the unit is OFF, the charging time for
800mA/h type batteries will be approx. 12 hours.
F
The “Charge” indication LED on the front panel
will light up when the batteries are being charged.
ATTENTION: Remove all non-rechargeable batteries
when connecting the AC/DC adapter !
The message “Lo . bat” will flash in the bottom right cor-
ner of your display when the batteries need replacement
(or charging). Insufficient battery voltage may entail erro-
neous measuring
results.
Survey of the indications on the screen :
Dot
indicates the vertical position of
the signal on the screen
Trigger opening indication
(fixed
in the middle of the screen)
Signal window
with (possibly) the
markers , cross or dot to indicate the
various divisions.
T
ime per division or time between markers
(when used)
D
isplay of converted/calculated frequency
1/dt between markers (if present)
T
rigger information or screen hold indica-
tion.
I
nput-coupling indication : ac/dc/gnd and
X10 probe setup
M
easurement readouts,
Vp (V peak-to-peak)
; Vr (Volt rms) ; dB (Decibels) ; V= (DC volt.)
R
eadout of the voltage between the mark-
ers (when present)
S
elected voltage per division
I
ndication of the selected function (blue
keys) or battery-low indication
!
USE
Summary of Contents for Personal Scope HPS5
Page 1: ......