PEM30DN
- 2 -
VELLEMAN
5. Aligning transmitter with receiver
Use the LEDs to align the transmitter and the receiver. This is easiest if you use an IR viewer or a camera (as most
cameras are IR sensitive, especially the B/W ones).
6. Security Prescriptions
•
Make sure that the voltage supply does not exceed the rated value.
•
Do not deactivate the device within 50ms after its activation in order to avoid damage.
•
Keep the cables well clear of other current-carrying conductors in order to avoid the creation of magnetic fields which
may cause interference.
•
Do not install the sensor where it is exposed to fluorescent lamps with rapid-starters or high-frequency starters.
•
Do not expose the device to dust, water, dirt or oil and protect it from vibrations or shocks to prevent malfunction.
7. Dimensions = Afmetingen
Bracket / Beugel / Etrier
Bracket / Beugel / PEM30DN
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.