9
To make the text transparent with the background, check
Transparent text
.
The text will have the same color as the vertical time markers.
Troubleshooting
Errors in time scale
When recording at short timebase (<1s/div) the sampling interval is <10ms. This is possible only on fast
computers. Anyhow, do not execute other applications during the recording process, it may influence the
measuring time scale.
The timebase of the measurements is generated by the internal timer of the computer. This timer can be put
on hold by other processes on the computer. This can cause a deviation in the time measurement.
To ensure the precision of the time measurement at short timebase:
Use a fast computer.
Do not run other applications when recording
Use highest possible processor speed
Prevent your computer from going into sleep or power saving mode
No signal
No communication with the computer (check that the cable is connected to the USB port).
If USB cable is connected, close the program. Disconnect and reconnect the USB cable and run the
program again.
o
RUN button is not ON.
o
TIME/DIV switch is in the wrong setting, try 1s/div
o
Input amplitude is too large, adjust VOLTS/DIV setting.
If the above tips have no effect, then test on a different computer or different USB port.
Note
. Close the program before disconnecting the USB cable.
