MONCOLHA GB
2
III.
Descriptions of the functions of the front & rear panels
2-1
The front panel
2-2
The back panel
IV.
Fixed function descriptions of pushing buttons
(1) Make sure that power supply of DC 12V, video input, and audio input are
properly connected.
(2) When power supply of DC 12V is properly connected, press "Power"
button to check if power LED is lit or not.
(3) Press "Power" and "Mode" buttons at the same time. Then release
"Power" button first, and release "Mode" button one second later. (This
action makes the monitor return to the original setting values.) At this
moment, all LEDs flash simultaneously, then original setting values are
displayed on the monitor.
(4) The adjustment and setting of function keys.
1.
Adjustment of "Contrast" function
1-1 When the "Power" LED is on, press the "Mode" button to
choose the "Contrast" LED.
1-2 Press "up" or "down" button to adjust a proper value. After 5
seconds of this action, the light indicator returns to "Power"
automatically. (When adjusting the "Contrast", the light indicator
flashes ; however, when the contrast value achieves Maximum
or Minimum, the light indicator keeps shining.)
