This unit will turn your computer into a powerful remote control.
Simply connect to the USB port, install the driver and you are set.
The transmitter works together with our K8056 card, equipped with
an RX433 receiver module. Also our K8070 / VM119 one channel
receiver can be used. In total a combination of 255 cards can be
addressed, resulting in a maximum of 2040 channels !!
Our wireless RGB controller, VM151 can also be used.
Drivers and example software can be downloaded from our
web site.
GETTING STARTED GUIDE
K8074
USB to RF remote control transmitter
Technical :
•
USB1.1 or 2.0 port compliant
•
Range : up to 30m (depends on environment)
•
Works with K8056(+RX433) and K8070 / VM119
VM151..
•
RF transmit indicator LED
•
Power LED
•
USB port function LED’s
•
255 selectable addresses
•
Transmit—test button
K8056 8 channel relay cards
K8070 / VM119 one channel dual output receivers
•
433MHz transmitter
•
R&TTE compliant design
•
Power supply : USB
•
Includes enclosure
•
Dimensions : 80x55x35mm
Screenshot of the demo and test software
