__________________________________________________________________________________________________________________________________________________________
21
•
Connect the double yellow wire with the connector marked ‘
YELLOW
’ SK6.
Connect the red wire with the connector marked ‘
RED
’ SK5.
Connect the blue wire with the connector marked ‘
BLUE
’ SK4.
Use the supplied female push-on connectors (fig 5) and solder them onto the wires !
Connect the remaining wires to the terminal blocks SK16 and SK17. Pay attention to the colors.
FIG 9
•
The supply transformer must be fitted according to the illustration, on the left hand side of the cabinet.
Watch the location of the wires. The sturdy grey and green wires, which supply the 6,3V filament
voltage, must sit on top.
STEEL DISHED WASHER
RUBBER WASHER
RUBBER WASHER
POWER
TRANSFORMER
M8 BOLT
FIG 10